Table of Contents
Advertisement
b Enter your username for the provider hotspot account.
If prompted, enter the domain name for your hotspot provider.
NOTE: If you chose Other from the list of hotspot providers, you may be required to enter your
username in the form of providername/username@domainname. Check with
the service provider for details.
c Enter your password for the provider hotspot account.
When a connection is made, the wireless network status light glows steady green.
Connecting to a free hotspot
Access to free hotspots is usually gained in one of three ways:
Connection without authentication—The network SSID is broadcast; the camera
■
scans, discovers, then connects to the network and your KODAK EASYSHARE
Gallery account.
■
Connection with authentication (limited support)—Access to the network is
granted after entering account information for the provider.
NOTE: Sites that use unique or non-standard methods for authentication may not be supported.
■
Connection with license agreement or welcome page (not supported)—Access to
the network is granted after accepting a license agreement or acknowledgement.
Since the camera interface does not support general Web browsing, it is not
capable of displaying site license agreements or welcome pages.
To connect to a free hotspot:
■
At the hotspot location, slide the Capture/View switch to View
the Wi-Fi card (see
already deployed, touch the Wireless icon,
The wireless network status light (next to the Wi-Fi card slot) blinks amber as the
camera scans for available networks.
The first time you try to connect, select the provider name from the list. If the
hotspot provider name is not shown, select Other.
When a connection is made, the wireless network status light glows steady green.
www.kodak.com/go/support
Using your camera with a Wi-Fi wireless network
page
44). (Wi-Fi card may be sold separately.) If the card is
, located on the bottom toolbar.
, then deploy
50
Advertisement
Table of Contents
