Safety Instructions - SMC Networks JMDB 32 Series Operation Manual

These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate
the level of potential hazard with the labels of "Caution," "Warning" or "Danger." They are all important notes for safety and
must be followed in addition to International Standards (ISO/IEC)*1),and other safety regulations.
※1) ISO 4414: Pneumatic fluid power - General rules and safety requirements for systems and their components
ISO 4413: Hydraulic fluid power -- General rules and safety requirements for system and their components
IEC 60204-1: Safety of machinery -- Electrical equipment of machines (Part 1: General requirements)
ISO 10218-1: Robots and robotic devices - Safety requirements for industrial robots - Part 1:Robots
etc.
Danger :
Warning:
Caution:
1. The compatibility of the product is the responsibility of the person who designs the equipment or decides its
specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific equipment must be
decided by the person who designs the equipment or decides its specifications based on necessary analysis and test results.
The expected performance and safety assurance of the equipment will be the responsibility of the person who has determined
its compatibility with the product. This person should also continuously review all specifications of the product referring to its
latest catalog information, with a view to giving due consideration to any possibility of equipment failure when configuring the
equipment.
2. Only personnel with appropriate training should operate machinery and equipment.
The product specified here may become unsafe if handled incorrectly. The assembly, operation and maintenance of machines
or equipment including our products must be performed by an operator who is appropriately trained and experienced.
3. Do not service or attempt to remove product and machinery/equipment until safety is confirmed.
1. The inspection and maintenance of machinery/equipment should only be performed after measures to prevent falling or
runaway of the driven objects have been confirmed.
2. When the product is to be removed, confirm that the safety measures as mentioned above are implemented and the
power from any appropriate source is cut, and read and understand the specific product precautions of all relevant
products carefully.
3. Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.
4.
Our products cannot be used beyond their specifications. Our products are not developed, designed, and
manufactured to be used under the following conditions or environments. Use under such conditions or
environments is not covered.
1. Conditions and environments outside of the given specifications, or use outdoors or in a place exposed to direct
sunlight.
2. Use for nuclear power, railways, aviation, space equipment, ships, vehicles, military application, equipment affecting
human life, body, and property, fuel equipment, entertainment equipment, emergency shut-off circuits, press clutches,
brake circuits, safety equipment, etc., and use for applications that do not conform to standard specifications such as
catalogs and operation manuals.
3. Use for interlock circuits, except for use with double interlock such as installing a mechanical protection function in case
of failure. Please periodically inspect the product to confirm that the product is operating properly.
Safety Instruction
Danger indicates a hazard with a high level of risk which, if not avoided, will
result in death or serious injury.
Warning indicates a hazard with a medium level of risk which, if not avoided,
could result in death or serious injury.
Caution indicates a hazard with a low level of risk which, if not avoided, could
result in minor or moderate injury.
Warning
-2-