User Safety Statement; Déclaration De Sécurité De L'utilisateur; Dichiarazione Di Sicurezza Dell'utente; Declaración De Seguridad Del Usuario - ATOMSTACK MAKER A5 V2 User Manual

Table of Contents

User Safety Statement Erklärung zur Benutzersicherheit Déclaration de sécurité de l'utilisateur Dichiaraz-

ione di sicurezza dell'utente Declaración de seguridad del usuario

Laser can harm human eyes and skin. Do not expose your eyes or skin directly to laser. The laser product has an optical lens and emits a straight laser beam. The light emitted by the product,

whether direct or reflected, is extremely harmful because it can spread over long distances while maintaining high light density. When handling the product, you must wear appropriate eye

protection goggles (OD5+) to protect your eyes from laser (including reflected and scattered light) damage. Reflected and scattered light spilled into unexpected areas should be attenuated

and/or absorbed.

2.1 Laser Safety

We have installed a laser protection cover on the laser, which can greatly filter out the diffuse reflection of the laser spot. However, when using a laser engraving machine, it is recommended that

you wear laser protective goggles. Avoid exposing your skin to a Class4 laser beam, especially at close range. Teenagers must be supervised by their parents during use. Do not touch the laser

engraving module when the machine is starting.

2.2 Fire Safety

Cutting burns the substrate, and high-intensity laser beams generate extremely high temperatures and a large amount of heat. Some materials may catch fire during cutting, generating gas and

smoke inside the equipment. When the laser beam hits the material, a small flame usually appears at this point. It will move with the laser and will not be on continuously when the laser passes.

Do not leave the machine unattended during the engraving process. After use, be sure to clean the debris, debris, and flammable materials in the laser cutting machine. Be sure to have a fire

extinguisher nearby to ensure safety. When using a laser engraving machine, smoke, steam, particles, and potentially toxic materials (plastics and other combustible materials) are generated, which

may harm health.

2.3 Material Safety

Do not engrave materials with unknown properties. Recommended materials: wood, bamboo, leather, plastic, fabric, paper, opaque acrylic, glass, metal. Materials not recommended: gems,

transparent materials, any reflective materials, including reflective metals, etc. Glass and reflective metal materials can only be engraved after they turn black.

2.4 Use Safety

The engraving machine can only be used in a horizontal position and must be firmly fixed to prevent fires caused by accidental movement or falling from the workbench during the working

process. It is forbidden to point the laser at people, animals, or any flammable objects, whether they are in working condition or not.

2.5 Electrical Safety

To prevent accidents such as fires and electric shocks, the laser engraving machine provides a power adapter with a ground wire. When using the laser engraving machine, plug the power plug

into a grounded power socket.

2.6 Environmental Safety

When installing engraving and cutting equipment, please ensure that the workplace must be cleaned up, and there must be no flammable and explosive materials around the equipment. When

engraving or cutting, a metal plate must be placed below the bottom.

Laser können das menschliche Auge und die Haut schädigen. Setzen Sie Ihre Augen oder Ihre Haut nicht direkt dem Laser aus. Das Laserprodukt verfügt über eine optische Linse und sendet einen

geraden Laserstrahl aus. Das vom Produkt emittierte Licht, ob direkt oder reflektiert, ist äußerst schädlich, da es sich über große Entfernungen ausbreiten kann und gleichzeitig eine hohe Leucht-

dichte beibehält. Beim Umgang mit dem Produkt müssen Sie eine geeignete Augenschutzbrille (OD5) tragen, um Ihre Augen vor Laserschäden (einschließlich reflektiertem und gestreutem Licht)

zu schützen. Reflektiertes und gestreutes Licht, das in unerwartete Bereiche fällt, sollte gedämpft und/oder absorbiert werden.

2.1 Lasersicherheit

Wir haben eine Laserschutzabdeckung am Laser angebracht, die die diffuse Reflexion des Laserspots stark herausfiltern kann. Bei der Verwendung einer Lasergravurmaschine wird jedoch

empfohlen, eine Laserschutzbrille zu tragen. Vermeiden Sie es, Ihre Haut einem Laserstrahl der Klasse 4 auszusetzen, insbesondere im Nahbereich. Jugendliche müssen während der Nutzung von

ihren Eltern beaufsichtigt werden. Berühren Sie das Lasergravurmodul nicht, wenn die Maschine startet.

Table of Contents