About This Operating Manual; Validity; Reference Documents; Symbols And Identification Markings - Alpha-InnoTec SWC Series Operating Manual

1

About this operating manual

This operating manual is part of the unit.
► Before working on or with the unit read the
operating manual carefully and follow it for all
activities at all times, especially the warnings and
safety instructions.
► Keep the operating manual to hand at the unit and
hand over to the new owner if the unit changes
hands.
► If you have any questions or anything is unclear,
ask the local partner of the manufacturer or the
factory's customer service.
► Note and follow all reference documents.

1.1 Validity

This operating manual refers solely to the unit
identified by the nameplate and unit sticker ( "Rating
plate", page 7 and "Unit sticker", page 3).

1.2 Reference documents

The following documents contain additional information
to this operating manual:
● Planning & design manual, hydraulic integration
● Operating manual of the heating and heat pump
controller
● Brief description of the heat pump controller
● Operating manual of the expansion board
(accessories)
● Logbook, if included with this unit by the
manufacturer
Unit sticker
The unit sticker contains important information for
contact with the manufacturer or the local partner of
the manufacturer.
► Stick on the unit sticker (barcode with serial and
product number) here.
Subject to change without notice | 83056700gUK – Translation of the original operating manual | ait-deutschland GmbH
1.3 Symbols and identification
markings
Identification of warnings
Symbol Meaning
Safety-relevant
Warning of physical injuries.
DANGER Indicates imminent danger resulting
in severe injuries or death.
WARNING Indicates a potentially dangerous
situation, which can result in severe
injuries or death.
CAUTION
Indicates a potentially dangerous
situation,
moderate or minor injuries.
IMPORTANT Indicates a potentially dangerous
situation,
property damage.
Symbols in the document
Symbol Meaning
Information for qualified personnel
Information for the owner/operator
Requirement for action

Single step action prompt

1., 2., 3., ... Numbered step within a multi-step
action prompt. Keep to the given
order.
Additional information, e.g. a tip on
making work easier, information on
standards
Reference to further information

elsewhere in the operating manual
or in another document
● Listing
information.
which can result in
which can result in
3