Download Print this page
Roban BO-105 Instruction Manual

Roban BO-105 Instruction Manual

Scale fuselage 450 size
Hide thumbs Also See for BO-105:

Advertisement

Quick Links

Instruction manual
Scale Fuselage BO 105
450 size
1. INTRODUCTION
Thank you for buying Roban Model products. The 340 size BO-105 scale fuselage is designed as an
easy to use product. Please read the manual carefully before assembling the model, and follow all
precautions and recommendations located within the manual. Be sure to retain the manual for future
reference, routine maintenance and tuning. The scale fuselage is designed for T-REX 450 Helicopter
series use. You can easily put it on your T-REX 450 for new clothing.
Important Note
Roban Model R/C Helicopters are advanced, high-performance devices, built incorporating the latest
technologies. They are not intended as toys, and improper use can potentially lead to serious injury,
or even fatal accidents. We implore you to read this manual thoroughly before operating these
models. Safety should be your utmost priority - not just your own, but also that of others and your
surroundings when piloting Roban Model products.
Liability Disclaimer:
The manufacturer and the seller cannot accept liability for the operation or misuse of this product.
Roban Model R/C helicopters are intended to be used exclusively by experienced adults in legally
sanctioned flying fields. Once sold, we cannot monitor or control the product's operation or usage.
Operation Guidelines:
Upon assembly of the scale fuselage, the weight and complexity of the structure will increase. To
mitigate risk of accidents and damages, we advise against attempting 3D flights.
Skill Requirements:

Advertisement

loading
Need help?

Need help?

Do you have a question about the BO-105 and is the answer not in the manual?

Questions and answers

Summary of Contents for Roban BO-105

  • Page 1 450 size 1. INTRODUCTION Thank you for buying Roban Model products. The 340 size BO-105 scale fuselage is designed as an easy to use product. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the manual. Be sure to retain the manual for future reference, routine maintenance and tuning.
  • Page 2 The operation of R/C products necessitates a certain level of skill and familiarity. Any damages or dissatisfaction resulting from accidents, modifications, or operational mishaps are not covered under any warranty. Consequently, such products cannot be returned for repair or if you experience problems during operation or maintenance.
  • Page 3 3. CONTENTS OF KIT Please check the contents of the kit prior to installation. CONTENTS Item No. Description Quantity Landing gear struts Screw A2x12 T-connectors Landing gear skids Rear redirection Screw A2x5 Screw M2x8 Washers Washer M2 Screw M2x18...
  • Page 4 Cable ties 2x145 Rear linkage Screw A2x12 Linkage connectors Set screw M3 Tail skid Windows Horizontal tail unit Vertical tail unit Screw A2x5 REQUIRED TOOLS / CONSUMABLES Tool No. Tool/Consumable Hobby knife Allen wrench Phillips screwdriver File Side cutters Silicone adhesive Super glue 2K Epoxy glue Fine sandpaper...
  • Page 5: Installation

    4. INSTALLATION Insert the landing gear linkage into the fuselage as shown. Secure the landing gear with 4 pieces of Screw A2x12 as shown. Install the T-connectors as shown.
  • Page 6 Mount the skids in the connectors and glue them. Attach the tail frame to the mechanism as shown. Remove a screw to be able to pivot the tail downward. Remove the tail cover.
  • Page 7 Glue the washers. Mount them on the mechanism. Secure the tail control with cable ties as shown.
  • Page 8 4.10 Insert the mechanism into the fuselage as shown. 4.11 Install the tail propeller and reinsert the screw. 4.12 Install the mechanism in the fuselage with 4 pieces of Screw A2x12.
  • Page 9 4.13 Install the linkage holders in the tail cover as shown. 4.14 Tighten the opposite side using the nut. 4.15 Install the tail skid as shown.
  • Page 10 4.16 Secure the tail skid with Set Screw M3 as shown. 4.17 Install the tail cover. 4.18 Install the window panes.
  • Page 11 4.19 Install the tail units. 4.20 Glue the tail units.
  • Page 12: Spare Part List

    4. SPAREPART LIST 450BO105 前 450 BO-105 HSB-BO450YE BO450PJ001 头含窗 canopy 450BO105 顶 450 BO-105 BO450PJ002 窗 side window 450BO105 平 450 BO-105 BO450PJ003 垂尾 tail wings 450 BO-105 450BO105 尾 BO450PJ004 elevated 波箱 tail set 450 BO-105 450BO105 脚...
  • Page 13 4. FULLY ASSEMBLED FUSELAGE Specifications: Lenght: 780mm Height: 260mm Width: 170mm Weight: 375g Suitable for Align TREX450 and derivatives We wish you a lot of fun with the fuselage! Copyright 2020 – www.robanmodel.com...