Download Print this page
Roban EC 135 Instruction Manual

Roban EC 135 Instruction Manual

Scale fuselage
Hide thumbs Also See for EC 135:

Advertisement

Quick Links

Instruction manual
Scale Fuselage EC 135
450 size
1. INTRODUCTION
Thank you for buying Roban Model products. The 450 size EC-135 scale fuselage is designed as an easy
to use product. Please read the manual carefully before assembling the model, and follow all
precautions and recommendations located within the manual. Be sure to retain the manual for future
reference, routine maintenance and tuning. The scale fuselage is designed for T-REX 450 Helicopter
series use. You can easily put it on your T-REX 450 for new clothing.
Important Note
Roban Model R/C Helicopters are advanced, high-performance devices, built incorporating the latest
technologies. They are not intended as toys, and improper use can potentially lead to serious injury, or
even fatal accidents. We implore you to read this manual thoroughly before operating these models.
Safety should be your utmost priority - not just your own, but also that of others and your surroundings
when piloting Roban Model products.
Liability Disclaimer:
The manufacturer and the seller cannot accept liability for the operation or misuse of this product.
Roban Model R/C helicopters are intended to be used exclusively by experienced adults in legally
sanctioned flying fields. Once sold, we cannot monitor or control the product's operation or usage.
Operation Guidelines:
Upon assembly of the scale fuselage, the weight and complexity of the structure will increase. To
mitigate risk of accidents and damages, we advise against attempting 3D flights.
Skill Requirements:

Advertisement

loading
Need help?

Need help?

Do you have a question about the EC 135 and is the answer not in the manual?

Questions and answers

Summary of Contents for Roban EC 135

  • Page 1 450 size 1. INTRODUCTION Thank you for buying Roban Model products. The 450 size EC-135 scale fuselage is designed as an easy to use product. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the manual. Be sure to retain the manual for future reference, routine maintenance and tuning.
  • Page 2 The operation of R/C products necessitates a certain level of skill and familiarity. Any damages or dissatisfaction resulting from accidents, modifications, or operational mishaps are not covered under any warranty. Consequently, such products cannot be returned for repair or if you experience problems during operation or maintenance.
  • Page 3: Contents Of Kit

    3. CONTENTS OF KIT Please check the contents of the kit prior to installation SCOPE OF DELIVERY Item No. Description Quantity Landing gear struts Screw A2x12 T-connectors Landing gear skids Step plates Screw A2x10 Washers: 3x12x50/56 Screw A2x12 EVA tail tube support Cable ties 2x145 Horizontal tail unit Screw A2x5...
  • Page 4 Tool No. Tool/Consumable Hobby knife Allen wrench Phillips screwdriver File Side cutters Silicone adhesive Super glue 2K Epoxy glue Fine sandpaper Scissors...
  • Page 5: Installation

    4. INSTALLATION 4.1. Attach the landing gear struts using 4 pieces of Screw A2x12 as shown. 4.2. Attach the 4 T-connectors as shown. 4.3. Insert the skids. Align them and glue them in place.
  • Page 6 4.4. Attach the step plates using 4 pieces of Screw A2x10 as shown. 4.5. Glue the washers as shown. 4.6. Mount the washers to the mechanics with 4 screws A2x12.
  • Page 7 4.7. Install the rubber in the tail. 4.8. Insert the mechanics. 4.9. The wooden adapters must be inserted into the detent.
  • Page 8 4.10. Secure the front section with cable ties as shown. 4.11. Install the tail propeller. 4.12. Mount the tail units using 4 pieces of Screw A2x5.
  • Page 9: Spare Parts List

    4.13. Glue the tail units with epoxy adhesive. 5. SPAREPARTS LIST 450EC-135 前 450 EC-135 EC450PJ001 头 canopy 450 EC-135 450EC-135 平 EC450PJ002 tail wing 垂尾 450 EC-135 450EC-135 脚 EC450PJ003 landing 架组 gear 450EC-135 脚 450 EC-135 EC450PJ004 踏 foot rest 450 EC-135 450EC-135 固...
  • Page 10 6. ILLUSTRATION OF READY MOUNTED HELICOPTER Specifications: Length: 758mm Height: 350mm Width: 156mm Weight: 385g Suitable for Align TREX450 und similar mechanics We wish you a lot of fun with the fuselage! Copyright 2024 – www.robanmodel.com...