Advertisement
2D Codes
This function reads and verifies 2D codes. Read results and verification results can also be output.
Measurement items to be executed from this measurement item onwards can also be specified according to
the verification results. This allows you to specify a measurement flow matched to the code type. Eight 2D
Code types can be read.
Data Matrix(EC200), QR Code, MicroQR Code, PDF417, MicroPDF417, Maxi Code, AZtec Code, Codablock
Setup
Draw the measurement region, then execute
AUTO setting. The code type and some of the
decode conditions are automatically set.
Important
Reading will end in error if the 2D Code type is incorrectly set. Set the code type before starting reading. When AUTO
setting is executed, the captured 2D barcode is read, and the following items can be set:
•Code type p.11
•Mirror p.11
•Code color (for Data Matrix and PDF417 only) p.11
•Shape (for Data Matrix only) p.11
Region settings
This function sets the measurement region.
MENU mode - [Setup] - [Item] - [Region]
Item
Description
Measurement region
Sets the region to be measured.
Measurement
One 2D barcode is read in a single measurement region.
When the measurement region contains multiple 2D
codes, the result of the first 2D code to be read is output.
Measurement region
ZFX-C1_/C2_-CD Additional Functions Instructions
7
Advertisement
