Advertisement
Additional Functions Instructions
This document describes the additional functions of the ZFX-C1_/C2_-CD. Other functions are the same as
those for the ZFX-C1_/C2_. Also read the User's Manual (Z264) for the ZFX-C1_/C2_.
Functions original to the ZFX-C1_/C2_-CD are as follows:
•Three measurement items: Barcode, 2D Code, Multi Colors
•Auto functions
Inspection by Individual Application
Barcode
This function reads and verifies barcodes. Read results and verification results can also be output.
Measurement items to be executed from this measurement item onwards can also be specified according to
the verification results. This allows you to specify a measurement flow matched to the code type. Nine barcode
types can be read.
JAN/EAN/UPC, Code39, Codabar(NW-7), ITF(Interleaved 2 of 5), Code 93, Code128/GS1-128,
GS1 DataBar*(Truncated, Stacked, Omni-directional, Stacked Omni-directional, Limited, Expanded, Expanded
Stacked), Pharmacode, GS1-128 Composite Code(CC-A,CC-B,CC-C)
*GS1 DataBar was formerly known as RSS.
Setup
Draw the measurement region, then execute
AUTO setting. The barcode type and some of the
decode conditions are automatically set.
Important
Reading will end in error if the barcode type is incorrectly set. Set the barcode type before starting reading. When
AUTO setting is executed, the captured barcode is read, and the following items can be set:
•Code type p.6
•Direction (for Pharma only) p.6
•Reverse decode (for Pharma only) p.6
ZFX-C1_/C2_-CD
Measurement
One barcode is read in a single measurement region.
When the measurement region contains multiple
barcodes, the result of the first barcode to be read is
output.
Measurement region
ZFX-C1_/C2_-CD Additional Functions Instructions
1
Advertisement
