Advertisement
Operation mode details (if necessary)
Set items below as required.
MENU mode - [Setup] - [Item] - [Detail] - [Function condition]
Setup Item
Verification func.
Verified master data
Partial verification
Compared digit
Output characters
Error string
Partial output
Output digit
Measurement control
• Output function of the read results p.5
•Measurement control function p.5
10
ZFX-C1_/C2_-CD Additional Functions Instructions
Setting Value
Description
OFF (default value)
When set to ON, verification with the master data is executed.
ON
All master data (default
Selects the model to be used for verification.
value)
Master data 0 to 31
OFF (default value)
The number of digits in the read results to be verified with the
master data can be limited. When [Partial verification] is set to
ON
ON, set the first and last compared digit positions. Up to 32
characters can be set as the number of digits.
1 to 1024 (default value first
digit:1 last digit:1)
Example: First compared digit 2, last compared digit 6
The text string used for verification becomes "MRON2".
OFF (default value)
Sets whether or not to output the read results on the serial
interface.
ON
Max. 20 digits (default
Sets the text string to be output when a read error occurs.
value: NG)
OFF (default value)
Sets whether or not to specify a range in the read data to output
from when [Output characters] is set to ON.
ON
1 to 1024 (default value
Sets the first and last digit positions to output. If the read text
first digit:1 last digit:1)
string contains non-targeted digits, the error string is output.
OFF (default value)
Sets whether or not to control the next measurement item to be
executed based on the verification results.
ON
O M R O N 2 0 0 8
6th digit
2nd digit
ASCII code table p.3
Advertisement
