Advertisement
Auto functions
AUTO button (RUN mode)
In the RUN mode, all measurement items can be batch-set automatically by pressing the [AUTO] button.
AUTO setting content differs with each measurement item. For details, see "AUTO Setting" in Chapter 7 of the
ZFX User's Manual.
MENU mode - [System] - [Operation] - [AUTO Button (RUN mode)]
Setup Item
ON
OFF
Save With AUTO Button
This function enables "AUTO setting" to be automatically saved after AUTO execution in RUN mode.
Important
All settings will be deleted if you turn the power OFF without saving the settings.
MENU mode - [System] - [Operation] - [Save With AUTO Button]
Setup Item
ON
OFF
14
ZFX-C1_/C2_-CD Additional Functions Instructions
Description
In the RUN mode, when the [AUTO] button is pressed, automatic setting of all
measurement items is executed.
In the RUN mode, the [AUTO] button
Description
Settings are saved immediately after AUTO Button in RUN mode is executed.
Settings are not deleted even if the power is turned OFF. Note, however, that
measurement is not possible while an AutoSave is being executed.
AutoSave is not performed after AUTO Button in RUN mode is executed.
does not function.
Advertisement
