Advertisement
Note
ASCII code table
The following table shows the ASCII codes that can be used for manual registration of master data and also for
registering characters of Limits.
Upper 4 bits
Lower 4 bits
Threshold
This function sets the judgment conditions.
MENU mode - [Setup] - [Item] - [Limits]
Item
Description
Num. of characters
Sets the range of number of characters to be judged as OK.
Range: 0 to 1024
Characters
The read text string is judged as OK when it is the same as the characters in this menu.
Up to 32 characters can be set. Check available characters in the ASCII table. 2-byte
characters, 1-byte kana characters and control codes cannot be entered.
The following characters can be used as wildcards:
*: Wildcard for zero or more characters
?: Wildcard for one character
ASCII code table p.3
ZFX-C1_/C2_-CD Additional Functions Instructions
3
Advertisement
