Mains Power Connection; Maintenance And Cleaning; Useful Tips - Pro-Ject Audio Systems 6 PerspeX Balanced Instructions For Use Manual

Mains power connection

A universal power supply with 3 exchangeable sockets adapters suitable for all countries is supplied. Select
the correct adapter for your country and insert the adapter to the exchangeable part of the power supply.
Connect the low voltage plug from the power supply to the socket (13) on the rear side of the record player
before connecting the power supply to the mains.
Fitting the lid
Fit the lid (dust cover 10) carefully over the hinge prongs and adjust the screws (12) until the lid stays open
where you want it to without being too stiff to open or close.

Maintenance and cleaning

Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic
cloth. Never use a dry cloth because this will create static electricity which attract more dust! Antistatic
cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage to rubber
parts. It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage.
If the player is not used over a long period of time the drive belt can be removed to prevent unequal stretching.
Always disconnect the record player from the mains power supply as a precaution before maintenance!

Useful tips

The lid is not only a dust cover but also a resonant structure likely to be excited by, and to pass into the plinth
the acoustic energy emanating from your loudspeakers during replay. Therefore, it is recommended to
remove the lid for achieving a better sound quality.
The record player should be positioned on a low-resonance surface such as wood or multiple layer ply board
to avoid structural vibrations disturbing replay.
Technical specifications PRO-JECT 6 PerspeX Balanced / Pro-Ject 9cc Evolution
Nominal speeds *
Speed variance
Wow and flutter
Signal to noise
Effective tonearm mass
Effective tonearm length
Overhang
Power consumption
Outboard power supply
Dimensions (W x H x D)
Weight
8
© Pro-Ject Audio Systems · 6 PerspeX Balanced · Revision 27.05.2024
33/45 r.p.m.
±0,1%
±0,06%
73dB
8g
9 " (230mm)
18mm
6W max / <0,3W stanby
15V DC / 800 mA AC, 90-264V AC, 47 – 63Hz
460 x 183 x 365mm, dust cover open 460 x 420 x 465mm
11kg