Page 3
Sub-chassis A, B, C Knurled sub-chassis levelling screws Screw-down record clamp (not shown) * Connection cable Pro-Ject Connect it Phono RCA-C (not shown) * Power supply (not shown) * Single adapter * Spirit level (not shown) * Dear music lover, thank you for purchasing a PRO-JECT AUDIO record player.
Page 5
To revert to 33 1/3 r.p.m. repeat the proceedings using the smaller step on the pulley. When the Pro-Ject Speed Box ore the Speed Box SE are used speed change between 33 and 45 r.p.m. is electronic. There is no need to move the belt manually.
The full sound quality of the record player can only be achieved if the cartridge is correctly adjusted. Particular tools like the PRO-JECT alignment tool are required to accomplish this job properly. If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your PRO-JECT dealer to accomplish this task for you.
Page 7
Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included.
Need help?
Do you have a question about the Pro-Ject 6 PerspeX SuperPack and is the answer not in the manual?
Questions and answers