Switching On And Off; Changing Replay Speed; Connection To The Amplifier - Pro-Ject Audio Systems 6 PerspeX Balanced Instructions For Use Manual

Switching on and off

Pressing the speed control button (4) alternately starts and stops the motor.

Changing replay speed

Press the speed control button STBY (4) for starting the turntable. To change the speed from 33 r.p.m. to 45
r.p.m., press the STBY (4) button again. Speed is correct, when the LED diode stops blinking. To switch the
turntable into STAND BY mode, hold the button STBY (4) for 3 seconds.

Connection to the amplifier

The record player offers gold plated female RCA phono sockets and a mini XLR output for the connection to
your amplifier.
To use our True Balanced Connection, your Pro-Ject turntable needs to be equipped with an MC
cartridge!
RCA OUTPUT:
Use the supplied Connect it E Phono cable and connect it to a Phono input (sometimes labelled gram, disc
or RIAA) on your amplifier. Make sure that the phono input offers correct matching and amplification for the
type of cartridge used. Line inputs (like CD, Tuner, Tape or Video) are not suitable.
Take care about connecting the left and right channel correctly. The RIGHT CHANNEL is usually marked
RED, the LEFT CHANNEL BLACK or WHITE. Check the manual of your amplifier for relevant information. An
earthing wire may be connected to the screw terminal between the sockets if you encounter humming
problems.
If your amplifier does not have an input suitable for phono cartridges, a separate phono amplifier stage for
MM or MC cartridges is required. It has to be connected between record player and a free line level input of
the amplifier.
MINI XLR OUTPUT:
To use the mini XLR output & take full advantage of the true balanced connection your turntable needs to be
equipped with an MC cartridge. „True Balanced Connection" phono cables are available separately. You
can find more details on our website or ask your Pro-Ject dealer for information.
© Pro-Ject Audio Systems · 6 PerspeX Balanced · Revision 27.05.2024
7