Pro-Ject Audio Systems Pro-Ject Xtension Instructions For Use Manual
Dj equipment
Hide thumbs
Also See for Pro-Ject Xtension:
- Instructions for use manual (9 pages) ,
- Instructions for use manual (9 pages) ,
- Instructions for use manual (10 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Pro-Ject Audio Systems Pro-Ject Xtension
Summary of Contents for Pro-Ject Audio Systems Pro-Ject Xtension
- Page 1 INSTRUCTIONS FOR USE Pro-Ject Xtension...
- Page 2 45.0 Speed Change Xtension/ © Audio Trade GmbH · Pro-Ject Ortofon tonearms · Revision 30.1.08/1.3.09...
-
Page 3: Controls, Features And Connections
Power supply (not shown) * Gloves (not shown) Dear music lover, thank you for purchasing a PRO-JECT AUDIO record player. In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully. -
Page 4: Cartridge Downforce Adjustment
Carefully retighten the hexagon screw without applying excessive force (which would deform the arm pillar) – finger tight is quite sufficient. Xtension/ © Audio Trade GmbH · Pro-Ject Ortofon tonearms · Revision 30.1.08/1.3.09... - Page 5 The full sound quality of the record player can only be achieved if the cartridge is correctly adjusted. Particular tools like the PRO-JECT alignment tool are required to accomplish this job properly. If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your PRO-JECT dealer to accomplish this task for you.
- Page 6 If your amplifier does not have an input suitable for phono cartridges you will require a separate phono amplifier stage for MM or MC cartridges such as the PRO-JECT PHONO BOX or the PRO-JECT TUBE BOX which is then connected between the record player and a free line level input of the amplifier.
-
Page 7: Maintenance And Cleaning
Offset abgle AS-212S - 22 Grad / AS-309S - 19 Grad Tonearm cable length approx. 120cm AS-212S - 483g / AS-309S - 535g Weight (plus headshell and cartridge) Xtension/ © Audio Trade GmbH · Pro-Ject Ortofon tonearms · Revision 30.1.08/1.3.09... -
Page 8: Warranty
Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included. - Page 9 Accessories Cut out for pulley Platter packed in a Cut outs separate box hinges Counterweight(s) Power supply Feet Record weight Xtension/ © Audio Trade GmbH · Pro-Ject Ortofon tonearms · Revision 30.1.08/1.3.09...