Pro-Ject Audio Systems Pro-Ject RPM 9 Carbon Instructions For Use Manual

Record player

Advertisement

INSTRUCTIONS FOR USE
Pro-Ject RPM 9 Carbon

Advertisement

Table of Contents
loading

Summary of Contents for Pro-Ject Audio Systems Pro-Ject RPM 9 Carbon

  • Page 1 INSTRUCTIONS FOR USE Pro-Ject RPM 9 Carbon...
  • Page 2 © Pro-Ject Audio Systems · Pro-Ject RPM 9 Carbon · Revision 2015.07.10...
  • Page 3: Pro-Ject Rpm 9 Carbon

    Signal cable Connect IT 5P-CC, 123cm (not shown) * Universal power supply (not shown) * Single adapter (not shown) * Spirit level (not shown) * Template (not shown) * © Pro-Ject Audio Systems · Pro-Ject RPM 9 Carbon · Revision 2015.07.10...
  • Page 4: Safety Instructions

    Remove the transport lock (18) from the tonearm. Store it in the original packaging so they are available for any future transportation. We recommend using the record player without a mat on the platter. © Pro-Ject Audio Systems · Pro-Ject RPM 9 Carbon · Revision 2015.07.10...
  • Page 5: Mounting And Connecting The Cartridge

    The full sound quality of the record player can only be achieved if the cartridge is adjusted correctly. Particular tools like the Pro-Ject Audio Systems alignment tool are required to accomplish this job properly. If you are not well acquainted with the adjustment of cartridges, please call for the willing help of your Pro-Ject Audio Systems dealer.
  • Page 6: Adjusting The Azimuth

    Connect the low voltage plug from the power supply to the socket (10) on the rear side of the record player before connecting the power supply to the mains. © Pro-Ject Audio Systems · Pro-Ject RPM 9 Carbon · Revision 2015.07.10...
  • Page 7: Maintenance And Cleaning

    12W max / <0,3W stanby Outboard power supply 15V DC / 1,6A AC, 90-264V AC, 47 – 63Hz Dimensions (W x H x D) 440 x 180 x 325mm Weight 16,5kg © Pro-Ject Audio Systems · Pro-Ject RPM 9 Carbon · Revision 2015.07.10...
  • Page 8: Warranty

    Potential incorrect use and fault conditions Pro-Ject Audio Systems turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances.
  • Page 9 © Pro-Ject Audio Systems · Pro-Ject RPM 9 Carbon · Revision 2015.07.10...

This manual is also suitable for:

Pro-ject rpm 10 carbonRpm 9 carbon

Table of Contents