Safety Instructions - Pro-Ject Audio Systems 6 PerspeX Balanced Instructions For Use Manual

Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems record player.
In order to achieve maximum performance and reliability, please study these instructions carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
** The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a
different model at a later date.
During assembling and adjustment small parts could be lost if they are not carefully placed in a suitable
receptacle. Before starting assembly make yourself acquainted with the parts listed above which are
correspondingly numbered in the technical drawings above. Separately packed items are marked with an
asterisk *.

Safety instructions

The power supply is used to connect and disconnect the unit from the mains. Make sure that the plug
is easily accessible at all times. Hold the plug when unplugging the power cord. Never handle the
power cord while your hands are wet or damp.
Avoid letting liquids enter the device. Never place any item containing liquid, like a flower vase, on
or near the device. Never spill any liquid on the device. Never place any naked flame sources, like
lighted candles, on or near the device. The product shall not be used in damp or wet locations, next to
a bathtub, sink, swimming pool or any other similar conditions.
Keep plastic bags away from children to prevent any risk of suffocation.
Setting up the sub-chassis
The deck is supplied partially disassembled and carefully packed for a safe transport. Remove all parts from
the transport packaging carefully.
Check the adjustment of the sub-chassis with the help of the spirit level supplied. If necessary, level the sub-
chassis using the three knurled sub-chassis levelling screws (A,B,C), located on the plinth.
Fit the drive belt (3) around the platter (5) and the motor pulley (2).
4
© Pro-Ject Audio Systems · 6 PerspeX Balanced · Revision 27.05.2024