C-7 Unit Parameter Object (Class 0X94); C-8 Componet Link Object (Class 0Xf7) - Omron MX2 COMPONET OPTION BOARD User Manual

Unit Parameter Object (Class 0x94)
C-7 Unit Parameter Object (Class 0x94)
Supported Service Codes
Object Details
Table C-13 Unit Parameter Object - Object Details
Instance Attribute
(hex) (hex)
01 64 Default Con-
nection Path
C-8 CompoNet Link Object (Class 0xF7)
Supported Service Codes
Object Details
Instance Attribute
(hex) (hex)
01 01 MAC ID
02 Baud rate
05 Allocation
choice
06 MAC ID Switch
Changed
08 MAC ID Switch
Value
0A Explicit mes-
sage timer
58
Table C-12 Unit Parameter Object - Supported Service Codes
Service Code No. (hex)
0E
10
Name Content
Selection of the default connection
path. Actual value is read and writ-
ten to inverter parameter P046.
Please refer to section 3-1 Installa-
tion of EDS files on page 15 for
details on P046.
Table C-14 CompoNet Link Object - Supported Service Codes
Service Code No. (hex)
0E
10
Name Content
Node address of option board
Baud rate of option board:
0: 93.75 kbit/s
1: Reserved
2: 1.5 Mbit/s
3: 3 Mbit/s
4: 4 Mbit/s
CompoNet communication con-
nection information
Node address changed after
power-on or reset
Node address setting actual value
Waiting timer setting for getting
token from Master to Slave
Service
Get attribute single
Set attribute single
Setting Default
range
0 - 7
Service
Get attribute single
Set attribute single
Setting Default
range
0 - 63
0 - 4
----
----
----
----
Appendix C
Get Set Size
1 Yes Yes USINT
Get Set Size
0 Yes No USINT
0 Yes No UINT
2 Yes No WORD
0 Yes No BOOL
0 Yes No UINT
0 Yes Yes UINT