Appendix B: Setting Up A Tftp Server; Set Up A Tftp Server; In A Linux Environment; In A Windows Environment - CyberData VoIP Intercom Operation Manual

Appendix B: Setting up a TFTP Server

B.1 Set up a TFTP Server
Upgrading the VoIP Intercom firmware requires a TFTP server on which you access the Web
interface where you can upload the firmware files.
B.1.1 In a LINUX Environment
To set up a TFTP server on LINUX:
1. Create a directory dedicated to the TFTP server, and move the files to be uploaded to that
2. Run the following command where
B.1.2 In a Windows Environment
You can find several options online for setting up a Windows TFTP server. This example explains
how to use the Solarwinds freeware TFTP server, which you can download at:
http://www.tucows.com/preview/326445
To set up a TFTP server on Windows:
1. Install and start the software.
2. Select File
3. Make a note of the default directory name, and then move the firmware files to be uploaded to
B.1.3 In a Solarwinds Server Environment
You can find several options online for setting up a Solarwinds server. This example explains how to
use the Solarwinds freeware TFTP server, which you can download at:
http://www.cyberdata.net/support/voip/solarwinds.html
Operations Guide
directory.
Step 1: the directory that contains the files to be uploaded. For example:
in.tftpd -l -s /tftpboot/your_directory_name
/ /
Configure Security tab
that directory.
is the path to the directory you created in
/tftpboot/
/
Transmit Only.
930181B CyberData Corporation
33