Upgrade The Firmware And Reboot The Intercom - CyberData VoIP Intercom Operation Manual

24 Installing the VoIP Intercom

Upgrade the Firmware and Reboot the Intercom

2.4 Upgrade the Firmware and Reboot the Intercom
To upload the Intercom firmware from your PC:
CyberData Corporation
1. Set up a TFTP server.
If you do not already have a TFTP server running on your network, see
a TFTP Server".
2. Retrieve the latest Intercom firmware from the CyberData website:
http://www.cyberdata.net/support/voip/intercom.html
3. Unzip the Intercom version file. This file may contain the following:
• Firmware file: 100-uImage-intcm
• Release notes
4. Copy the firmware files to be upgraded to the appropriate TFTP server directory:
• c:\tftp-root\for Windows
• /tftpboot/for Linux
5. Log in to the Intercom home page as instructed in
Home Page".
6. Click the Upgrade Firmware button to open the Firmware Upgrade page. See
7. Enter the IP address of your TFTP server into the TFTP Server IP parameter field.
Section 2.3.1, "Log in to the Configuration
Figure 2-18. Firmware Upgrade Page
930181B
Appendix B, "Setting up
Figure 2-18.
Operations Guide