30
Mount the Intercom
If the thread on the conduit is longer than 3/8 inch, then a stop nut (not supplied) is required.
Otherwise, use the outlet box plug to plug the exit hole.
Figure A-3
CyberData Corporation
Figure A-2. Mounting the VoIP Intercom Assembly
shows the restrictions of the pipe going into the box.
Figure A-3. Pipe Restrictions
Not to Exceed 0.1"
HOLE PLUG
930181B
OR
CONDUIT
CONDUIT
Operations Guide
Need help?
Do you have a question about the VoIP Intercom and is the answer not in the manual?
Questions and answers