CyberData VoIP Intercom Operation Manual page 31

Web Page Item
Authenticate ID*
Authenticate Password*
SIP Registration*
Unregister on Reboot*
Register Expiration*
Button Dial-Out: Primary Number
3. After changing the parameters, click Save Settings.
Operations Guide
Table 2-8. SIP Setup Parameters (continued)
Description
Enter the Authenticate ID (up to 25 alphanumeric
characters).
Enter the Authenticate Password (up to 25 alphanumeric
characters).
Enable/Disable SIP Registration.
• Select Yes to automatically unregister the Intercom when
it is rebooted.
• Select No to keep the Intercom registered when it is
rebooted.
Enter the SIP Registration lease time in minutes (default 60
minutes).
Enter the button dial-out primary number.
Click this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Link to the Intercom Setup page.
Link to the Network Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
930181B
Installing the VoIP Intercom
Configure the Intercom Parameters
CyberData Corporation
23