Configure The Network Parameters - CyberData VoIP Intercom Operation Manual

18 Installing the VoIP Intercom
Configure the Intercom Parameters
Web Page Item

2.3.2 Configure the Network Parameters

Web Page Item
IP Addressing*
IP Address*
CyberData Corporation
1. Click the Network Setup button to open the Network Setup page
2. On the Network Setup page, enter values for the parameters indicated in
Table 2-5. Home Page Overview (continued)
Description
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.
Figure 2-14. Network Setup Page
Table 2-6. Network Setup Parameters
Description
Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
go to Step 3.
Enter the Static IP address.
930181B
(Figure 2-14).
Table 2-6.
Table 2-6
. If you select DHCP,
Operations Guide