Set Up The Intercom - CyberData VoIP Intercom Operation Manual

20 Installing the VoIP Intercom
Configure the Intercom Parameters

2.3.3 Set up the Intercom

Web Page Item
Device Name
Change Username
Change Password
Re-enter New Password
Speaker Volume (0 - 9)
Microphone Gain (0 - 9)
Auxiliary Relay
DTMF Relay Activation Code (3 digits)
Relay Activation Duration (0 - 9 seconds)
CyberData Corporation
1. Click the Intercom Setup button to open the Intercom Setup page. See
2. On the Intercom Setup page, enter values for the parameters indicated in
Figure 2-15. Intercom Setup
Table 2-7. Intercom Setup Parameters
Description
Enter a descriptive name for this device (if desired).
Use this field to change the Web Access Username
Use this field to change the Web Access Password
Use this field to re-enter a new password
Shows the current volume level.
Shows the current microphone gain level.
Allows you to enable or disable the auxiliary relay.
Use this field to enter the DTMF relay activation code.
Use this field to enter the relay activation duration.
930181B
Figure 2-15.
Table 2-7.
Operations Guide