Omron GRT1 - 27-11-2006 Operation Manual page 98

Slave Diagnostics Message
Slave Diagnostics Bytes 5 to 6: Ident Number
Slave Diagnostics Bytes 5 and 6 contain the PROFIBUS Ident Number of the slave device. The Ident number
uniquely identifies the type of device. For the GRT1-PRT PROFIBUS DPV1 slave the Ident number is 098F
(Hex).
B-2 Extended Diagnostics
Module Diagnostics
The Module Diagnostics will indicate whether or not SmartSlice I/O Units have communication or configuration
errors related to the Unit.
7
Byte 7
Byte 8 7
Byte 9 15
Byte 10 23
Byte 11 31
Byte 12 39
Byte 13 47
Byte 14 55
Byte 15 63
Byte 16
Module Diagnostics bytes
Bit Name
00 COM Status
01 - Module Diagnostics
64
6 5 4 3 2
Header byte = 4A (Hex)
6 5 4 3 2
14 13 12 11 10
22 21 20 19 18
30 29 28 27 26
38 37 36 35 34
46 45 44 43 42
54 53 52 51 50
62 61 60 59 58
Fixed to 0
When set, this bit indicates that there is Diagnostics information pending related
to the COM status.
When set, this bit indicates that there is Diagnostics information pending related
to the corresponding SmartSlice slot.
1 0
1 0 SmartSlice Slot 1 ~ 7, COM Status (0)
9 8 SmartSlice Slots 8 ~ 15
17 16 SmartSlice Slots 16 ~ 23
25 24 SmartSlice Slots 24 ~ 31
33 32 SmartSlice Slots 32 ~ 39
41 40 SmartSlice Slots 40 ~ 47
49 48 SmartSlice Slots 48 ~ 55
57 56 SmartSlice Slots 56 ~ 63
64 SmartSlice Slot 64
Description
Appendix B
79