Omron GRT1 - 27-11-2006 Operation Manual page 36

Installing the GRT1-PRT Unit
SmartSlice I/O System
Orientation
Installing a Unit
Removing a Unit
There is no restriction regarding orientation of the SmartSlice I/O System. The
system can be mounted in any of the following 6 directions.
To install a PROFIBUS Communication Unit on the DIN Rail, press the Unit
onto the DIN Track from the front. Press the Unit firmly until it clicks, indicating
that the Unit's DIN Rail Mounting Hooks have all locked onto the DIN Rail.
When the Unit is pushed onto the DIN Rail,
verify that the Mounting Hooks have locked.
Mounting Hooks
Use a standard screwdriver to release the DIN Rail Mounting Hooks at the top
and bottom of the Unit and pull the Unit straight away from the DIN Rail.
Section 2-2
Press firmly towards the DIN Ra
Press firmly until you hear a clic
indicating that the Mounting Hoo
have locked.
17