Edit Menu - FLASHFORGE 3D PRINTER Creator Max User Manual

Save Project: Click File > Save Project or press CTRL+S to save the current project. Projects
files have a .FPP suffix.
Load File: Click File > Load File or press CTRL+O to load a model, Gcode, or project file.
Save As: Click File > Save As to save the project or model file.
Examples: Click File > Examples to load one of four built-in sample models.
Recent Files: Click File > Recent Files to choose from a list of recently loaded files.
Preferences: Click File > Preferences to set several General and Print preferences.
· Language: Allows you to select the language used in FlashPrint.
· Font Size: Allows you to set the size of the font used in FlashPrint. You can select Small,
Medium, or Large.
· Check for Updates after start up: Determines whether FlashPrint will automatically check
· Auto layout newly-imported model: Determines whether the software will automatically
· Printing Window Type: Allows you to choose the Basic (default) print dialog or the Expert
Quit: Click File > Quit or press ALT+F4 to exit FlashPrint. If there are any unsaved changes to
your project or model, you will be prompted to save the changes.

Edit Menu

The Edit Menu contains the following options.
Undo: Click Edit > Undo or press CTRL+Z to undo the last change. In most cases, you can undo
multiple changes, one at a time.
Redo: Click Edit > Redo or press CTRL+Y to redo the last change that was undone. In most cases,
you can redo multiple undos.
Empty Undo Stack: Click Edit > Empty Undo Stack to clear the software's memory of recent
Select All: Click Edit > Select All or press CTRL+A to select all models in the scene.
Duplicate: Click Edit > Duplicate or press CTRL+V to copy the selected model(s).
Delete: Click Edit > Delete or press the Del key to delete the selected model(s).
Auto Layout All: Click Edit > Auto Layout All to automatically arrange the model(s) on the build
platform. You will be prompted to set the distance between models, which can be
from 1.0 to 50.0 mm.
Mirror Model: Click Edit > Mirror Model to mirror the selected model(s) in the X, Y, or Z planes.
Repair Models: Click Edit > Repair Models to correct any errors in the selected model(s).
Supports: Click Edit > Supports to enter Support Edit mode.
for the existence of software or driver updates.
dialog, with many more individual settings.
undos. This has the same effect as saving and reloading the project or model file.
adjust the position of a model immediately after it is loaded.
34