DeviceNet explicit message communications are used to read and write the E5ZE ' s measurement values and set values that
cannot be read or written using remote I/O communications. Settings can also be made from a master not manufactured by
OMRON.
Parameters written using DeviceNet explicit messages are saved even if the power supply is turned OFF.
This section provides details on DeviceNet explicit messages, including command and response formats, the instructions
used by the PC to execute DeviceNet explicit message communications, and tables of set values and measurement values
showing setting ranges, default values, data types, and addresses.
4-1
4-1-1
Command Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1-2
Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1-3
4-2
4-3
4-3-1
4-3-2
4-3-3
Control Data for Sending DeviceNet Explicit Messages Using
CMND(194/490) or IOWR(223) . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4
DeviceNet Explicit Messages Set Values and Measurement Values . . . . . . .
4-4-1
Commonly Used Set Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4-2
4-4-3
4-4-4
4-4-5
4-4-6
4-4-7
4-4-8
Set Values for All Control Points . . . . . . . . . . . . . . . . . . . . . . . . . . .
DeviceNet Explicit Message Communications
SECTION 4
18
18
19
19
19
20
20
20
21
21
21
27
27
28
28
30
31
32
17