Omron E5ZE-8 Communications Manual page 36

DeviceNet Explicit Messages Set Values and Measurement
4-4-8 Set Values for All Control Points
Variable Type: 88
Address
measurement value
F000 Specification tempera-
ture range lower limit
(See note.)
F001 Specification tempera-
ture range upper limit
(See note.)
F002 Temperature unit
F003 Setting unit
32
The following variable table is used for setting and monitoring set values that
are used for all control points.
Set value or
Depends on the temperature sensor type used. Numeric
0: C or 1: F
0: 1 C/ F or 1: 0.1 C/ F
Default: 0
Note When a W sensor is used with the setting unit set to 0.1 C/ F, the upper limit
will be read as 7D00.
Data setting or monitoring range
Section 4-4
Data type
Read only
Numeric
Read/write