Q & A; I Get The Message S-Err; The Temperature Varies; The Temperature Overshoots - Omron E5CC Quick Start Instruction

OMRON
3. Q & A

I get the message s-err.

Answer:

The temperature varies.

Answer:

The temperature overshoots.

Answer:

There is a discrepancy between measured and actual value.

Answer:

What is hysteresis and how do I set it?

Answer:

How do I use alarm / help connections? It does not work as expected

Answer:

The alarm does not switch to the set value

Answer:

I cannot open the advanced settings menu.

Answer:
22
This is because the reader has been connected incorrectly,
the controller has been set incorrectly, or the reader has
a malfunction, see
A controller set to ON-OFF has over and undershoot.
If necessary, set the controller to PID, see
through 1.3.2
A controller set to ON-OFF has over and undershoot.
If necessary, set the controller to PID, see
through 1.3.2
The reader may not show the correct temperature, possibly
due to ageing. This can be resolved by setting a shift, see
Chapter 1.5
Hysteresis is used in an ON-OFF controller, and it ensures
that the controller does not "jump" around the set value
(SV). For an explanation, see
The alarm type may not have been set correctly.
The operation of the alarm types is explained in
The alarm type may not have been set correctly.
The operation of the alarm types is explained in
This level is hidden by default. Decrease the protect level,
as described in
Chapter 1.2.1 and Chapter 1.2.2
Chapter 1.6
Chapters 2.1 and 2.2
Quick Start Instruction E5CC
Chapters 1.3
Chapters 1.3
Chapter 1.4
Chapter 1.4