CyberData 3CX Setup Manual page 10

13. After clicking on Save, a reboot timer countdown will begin.
14. After the Intercom reboots, the green Status LED on the Intercom will blink at one second
15. To test the Intercom, complete the following steps:
•
•
•
•
This step completes the procedure.
Server Setup Guide
Rebooting, please wait... 00:04
intervals to indicate normal operation.
Note If Yes is selected for Speaker Beep After Initialization on the Intercom Setup page, you
will hear a tone after the initialization sequence is complete.
Pick up any phone that is configured to the 3CX system and call the Intercom's extension
number.
When a connection is established (as indicated by a beep), speak into the phone and verify
that you can hear your voice through the Intercom.
Hang up the phone and press the Call Button on the Intercom.
When the phone rings, pick up the phone. Speak into the phone and verify that you can
hear your voice through the Intercom.
Figure 4-8. Intercom Reboot Timer
930272B CyberData Corporation
10