4.11 Using Auxiliary Outputs
The Auxiliary Output
Assignment, Alarm Type, Alarm Value, Alarm Upper Limit, Alarm Lower Limit, and
Alarm Set Number parameters are described in this section.
■ Auxiliary Output Assignments
Auxiliary Output
Auxiliary outputs
Assignments
SUB1
SUB2
SUB3
SUB4
SUB5
SUB6
SUB7
SUB8
SUB9
SUB10
The type of data that is output from each auxiliary output can be
assigned.
On Controller models with more than one output, data assignments
can also be set for channels 2 and higher for the number of supported
channels.
Channel 1
Channel 1 Alarm 1
Channel 1 Alarm 2
Channel 1 Alarm 3
Channel 1 Alarm 4
?????
Channel 1 Input Error
Channel 1 RSP Input Error
U-ALM Output
The U-ALM Output setting is an OR output of alarms 1 to 4 of all
channels (overall alarm).
The default settings are as follows:
SUB1
Channel 1 Alarm 1 Channel 1 Alarm 2 Channel 1 Alarm 3 Channel 1 Alarm 4
The E5ER-T@T@@ has only two auxiliary outputs, i.e., they do not
have SUB3 and SUB4.
4.11 Using Auxiliary Outputs
2
3
3
4
?????
Alarm 1 OR output for all Channels
Alarm 2 OR output for all Channels
Alarm 3 OR output for all Channels
Alarm 4 OR output for all Channels
Input Error OR output for all Channels
RSP Input Error OR output for all Channels
SUB2
SUB3
All Channels
SUB4
4-37