Omron E5AR-T User Manual page 288

Input Temperature Unit
Function
Setting
Reference
Reference
CH
Scaling Input Value 1
Scaling Display Value 1
Scaling Input Value 2
Scaling Display Value 2
Decimal Point Position
Function
Setting
i*du
• Select Celsius (°C) or Fahrenheit (°F) for the temperature unit.
Setting range
c: °C
f: °F
● Related Parameters
Input Type (Input Initial Setting Level) (P. 8-50)
inp.1
dsp.1
inp.2
dsp.2
dp
• These parameters are used with an analog input.
• Scaling is carried out for the analog input. The display value for the
input value specified in the Scaling Input Value 1 parameter is set in
the Scaling Display Value 1 parameter, and the display value for
input value set in the Scaling Input Value 2 parameter is set in the
Scaling Display Value 2 parameter.
• The Decimal Point Position parameter is used to specify the decimal
point position of the set values (SP, etc.) given in EU.
• Scaling settings for inputs 2 to 4 of a Controller with more than one
inputs are set for channels 2 to 4. Press the
the desired analog input channel and then set the scaling.
Parameter
Scaling Input Value 1
Scaling Display Value 1
Scaling Input Value 2
Scaling Display Value 2
Decimal Point Position
* The unit depend on the input type setting.
8.11 Input Initial Setting Level (l.0)
Unit
CH
Setting range Unit
Input lower limit to
input upper limit
19999 to
EU
Scaling upper limit 1
Input lower limit to
input upper limit
Scaling lower limit + 1
EU
to 99999
0 to 4
l.0
Temperature input
Default value
c: °C
l.0
Analog input
Key to change to
Default value
4
0
20
100
0
8-51