Operation; Set Up; Line Voltage Connection: 1080W Models - TEXIO PSW-A Series Instruction Manual

2. OPERATION

2.1. Set Up

2.1.1.

Line Voltage Connection: 1080W Models

The 1080 models use a universal power input that can be used with 100
and 200 VAC systems. To connect or replace the power cord, use the
procedure below:
Warning
How to remove AC cord
steps Removal instructions
1 Turn off the power switch.
2 Remove the cover protecting the AC
cord.
3 Remove the screws (2 places) that
secure the cover protecting the power
terminal.
4 Slide the cover off the AC terminals.
5 Remove the AC power cord wires.
The following procedure should only be attempted by
competent persons.
Ensure the AC power cord is not connected to this
product.
28
3
2