TEXIO PSW-A Series Instruction Manual page 41

6 When using local sense, connect the -S pin to a -V pin, and
connect the +S pin to a +V pin.
7 When not using local sense, see the
remote sense section to wire the sense
terminals for remote sensing.
8 If necessary, connect the chassis ground
terminal to either the -V or +V pin. See
the grounding chapter for details.
9 Reattach the output terminal cover.
Local sense wiring
To negative
potential
-V
+V
V
To positive
potential
SN.C. S V
Remote sense wiring
35
Refer to page 49.
Refer to page 26.
Refer to page 35.