Section 6-12
Counter (Block Model 208)
11: MV Display, MV Change Button, and MV Index Position
The Timer face plate does not provide an MV display, MV Change Button, or
MV index position.
12: Tuning Screen Button
The Timer face plate does not provide a Tuning Screen Button.
The following diagram shows a Timer face plate built using the Face Plate
Auto-Builder for NS in a 640×480 screen resolution.
The whole face is built using 458×142 dots.
The display and operation of each object in the face plate is the same as the
version for 800×600 screen resolution.
6-12 Counter (Block Model 208)
This section describes only the differences between the Counter Block and
Basic PID Block (Block Model 011). For details on the areas not covered here,
refer to 6-1 Basic PID (Block Model 011).
83