Blended PID (Block Model 013)
6-17 Blended PID (Block Model 013)
6-17-1 Face Plates
102
The whole face is built using 458×142 dots.
The display and operation of each object in the face plate is the same as the
version for 800×600 screen resolution.
This section describes only the differences between the Blended PID Block
and Basic PID Block (Block Model 011). For details on the areas not covered
here, refer to 6-1 Basic PID (Block Model 011).
This function block performs PID control on the cumulative value (cumulative
deviation) between the accumulated value PV and accumulated value
Remote Set Point. Ratio control of flowrate accumulated values is possible
because this function block is provided with a ratio to accumulated Remote
Set Point function.
Section 6-17