Face Plates - Omron CXONE-ALC-V4 - 10-2010 Operation Manual

ON/OFF Valve Manipulator (Block Model 221)

6-13-1 Face Plates

The ON/OFF Valve Manipulator Block can operate and monitor an ON/OFF
valve equipped with limit switches to detect the valve's fully open/fully closed
conditions.
11
8
9
1: Status Display
Either AUTO or MAN status is displayed. The value of tag ITEM S1 deter-
mines which status character string is displayed.
Display S1: A/M Switch Input (086)
MAN 0
AUTO 1
This button is created as an ON/OFF Button using a Simple Rectangle (Type
1) to switch the ON/OFF labels.
Control Flag input is disabled.
2: Switch to AUTO Button
This button switches operation to Auto mode and is displayed in red during
Auto mode.
The button is created as a momentary ON/OFF Button using a Simple Rect-
angle (Type 2), and the display color is determined according to the following
table.
Display color S1: A/M Switch Input (086)
Yellow 0
Red 1
The label displays "AUTO" in the rough font.
By setting the following Touch OFF Timing macro, operation will switch to Auto
mode when touched.
1
2
3
4
5
6
7
10
Section 6-13
87