Indication And Operation (Block Model 032); Face Plates - Omron CXONE-ALC-V4 - 10-2010 Operation Manual

Indication and Operation (Block Model 032)

6-5

Indication and Operation (Block Model 032)

6-5-1

Face Plates

The display and operation of each object in the face plate is the same as the
version for 800×600 screen resolution.
A setting field for each parameter is not provided, so up to eight characters can
be displayed for the unit character string for 3-position ON/OFF, instead of the
four characters for Basic PID.
This section describes only the differences between the Indication and Setting
and Basic PID (Block Model 011). For details on the areas not covered here,
refer to 6-1 Basic PID (Block Model 011).
The face plates are almost the same as for Basic PID (Block Model 011),
except for the following aspects.
• The SP is X1 (Auto input) and read-only (no SP Change Button provided).
• A deviation alarm (DV) is not provided.
• Remote mode is not supported.
Section 6-5
55