Omron CXONE-ALC-V4 - 10-2010 Operation Manual page 87

Indication and Setting (Block Model 031)
1
2
3
1: Status Display
Either CAS or LOCAL status is displayed. The value of tag ITEM R/L_SW
determines the status character string display.
Display
LOCAL 0
CSS 1
This button is created as an ON/OFF Button using a Simple Rectangle (Type
1) to switch the label ON/OFF.
Control Flag input is disabled.
2: LOCAL Button
The LOCAL Button is displayed in red while in Local mode.
This button is set as a momentary ON/OFF Button using a Simple Rectangle
(Type 1), and the background color is determined according to the following
table.
Display color
Red 0
Yellow 1
The label displays "LOCAL" in the rough font.
By setting a Touch OFF Timing macro as shown below, operation will switch
to Local mode when touched.
$B32760=0;
WRITECMEM ([R/L_SW],$B32760,1);
This button is always displayed, without setting a Control Flag to disable the
display and input, which is different from the Switch to CAS Button.
R/L_SW (026)
R/L_SW (026)
Section 6-8
71