Advantech FWA-1112VC User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

SER

ANUAL

) D

2020/06/04

DITION

RAFT

ATE

FWA-1112VC

ETWORK

LATFORM

Table of Contents

Need help?

Do you have a question about the FWA-1112VC and is the answer not in the manual?

Questions and answers

Summary of Contents for Advantech FWA-1112VC

Page 1 ANUAL 2020/06/04 DITION RAFT FWA-1112VC ETWORK LATFORM...
Page 2: Table Of Contents
System diagram 6xRJ45 ..............24 1.5.2 System diagram 4xRJ45 + 2x10G/1G SFP+ ......25 .................. 26 OMPONENT NSTALLATION 1.6.1 Memory ....................26 1.6.2 Storage ...................... 27 1.6.3 Wifi ......................28 FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 2...
Page 3 Setup POST & Boot Menu ..............68 3.1.17 Compatibility Support Module (CSM) Configuration ..70 3.1.18 CSM16 Configuration ................. 72 3.1.19 Security Setup ..................73 3.1.20 Save & Exit Menu ................. 74 FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 3...
Page 5: Preface
The documentation and the software included with this product are copyrighted by Advantech Co., Ltd. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.
Page 6: Revision History
Warning! Warnings indicate conditions, which, if not observed, can cause personal injury. Caution! Cautions are included to help you avoid damaging hardware or losing data. Note! Notes provide additional information. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 6...
Page 7: Safety Instructions
17. The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 7...
Page 8 18. RESTRICTED ACCESS AREA: The equipment should only be installed in a Restricted Access Area. 19. DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. FWA-1112VC_UserManual_Ed1...
Page 9: Declaration Of Conformity
EMC Directive 2014/30/EU, Safety Directive 2014/35/EU. 警告使用者：这是甲类资讯产品，在居住的环境中使用，可能会造成射频干扰，在这种情况下，使用者会被要求采取某些适当的对抗。声明：此为A级产品，在生活环境中，可能会造成无线干扰，在这种情况下，可能需要用户对其干扰采取切实可行的措施。安全指令 1. 请仔细阅读此安全操作说明。 2. 请妥善保存此用户手册供日后参考。 3. 用湿抹布清洗设备前，请从插座拔下电源线。请不要使用液体或去污喷雾剂清洗设备。 4. 对于使用电源线的设备，设备周围必须有容易连接到的电源插座。 5. 请让设备远离潮湿环境。 6. 请在安装前确保设备放置在可靠的平面上，意外跌落可能会导致设备损坏。 7. 设备外壳的开口是用于空气对流，从而防止设备过热。请不要覆盖这些开口。 8. 当您连接设备到电源插座上前，请确认电源插座的电压是否符合要求。 9. 请将电源线安置在人们不易绊到的位置，并不要在电源在线覆盖任何杂物。 FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 9...
Page 10  电源线或者插头损坏；  设备内部有液体流入；  设备曾暴露在于于潮湿的环境中使用；  设备无法正常工作，或您无法通过用户手册来使其正常工作；  设备跌落或者损坏；  设备有明显的外观破损。 15. 请不要把设备放置在超出我们建议的温度范围的环境，即不要低于0°C(-20°C;-4°F) 或高于40°C(60°C;140°F)，否则可能会损坏设备。 16. 注意：如果电池放置不正确，将有爆炸的危险，因此，只可以使用制造商推荐的同一种或者同等型号的电池进行替换。请按照制造商的指示处理已使用过的电池。 17. 根据IEC 704‐1:1982 规定，设备产生的音量不高于70 分贝。 18. 免责声明：请安全训示符合IEC 704‐1 要求。研华公司对其内容之准确性不承担任何法律责任。 FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 10...
Page 11: Technical Support And Assistance
2. Contact your distributor, sales representative, or Advantech's customer service centre for technical support if you need additional assistance. Worldwide contact information can be found on www.advantech.com.Please have the following information ready before you call: Product name and serial number •...
Page 12: Warranty And Rma
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Page 13: Introduction
FAW-1112VC. Due to the fan-less and IP40 design, hush environment such as factory and gas station could be the potential deploying environment as well. FWA-1112VC features 6x ethernet interfaces. 2core and 4core SKU comes with 6xRJ45 connector while 8core SKU comes with 4xRJ45 + 2x10G/1G SFP+ connectors. 1x RJ45 console port and 2x TypeA USB3.0 are included for ALL SKU.
Page 14: System Outlook
System Outlook 1.2.1 RONT At front side, FWA-1112VC ALL SKU features Power button, 2x TypeA USB3.0 port, 1x RJ45 consol port. For 2core/4core SKU, 6xetheret interfaces are ALL RJ45, LED indicator includes HDD LED, 1 LTE LED, Wifi/2 LTE LED, SW defined 1 LED, SW defined 2 LED. For 8core SKU, 6xetheret interfaces includes 4xRJ45 and 2x 10G/1G SFP+.
Page 15: Rear View
1.2.2 At rear side, FWA-1112VC features 12V DC power jack, 1x SW defined/reset button, SIM slot , and optional PoE power connector.Totally 4x antenna hole has reserved. Figure 5 Rear View (Wide Temp SKU) Figure 6 Rear View (Normal Temp SKU) 1.2.3...
Page 16: Side View (Right)
1.2.4 IGHT Figure 9 Side View(RIGHT, Wide Temp SKU) Figure 10 Side View(RIGHT, Normal Temp SKU) 1.2.5 Figure 11 Top View(Wide Temp SKU) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 16...
Page 18: System Layout & Architecture
System Layout & Architecture 1.3.1 YSTEM AYOUT System layout as below: Figure 13 System Layout(Front) 6xRJ45 (Wide Temp SKU) Figure 14 System Layout(Front) 6xRJ45 (Normal Temp SKU) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 18...
Page 19 Figure 15 System Layout(Front) 4xRJ45 + 2x10G/1G SFP+ (Wide Temp SKU) Figure 16 System Layout(Front) 4xRJ45 + 2x10G/1G SFP+ (Normal Temp SKU) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 19...
Page 21: System Architecture
1.3.2 YSTEM RCHITECTURE System Architecture as below Figure 19 System Architecture (Wide Temp SKU) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 21...
Page 23: Block Diagram & System Diagram
Block Diagram & System Diagram 1.4.1 LOCK IAGRAM Figure 21 Block Diagram FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 23...
Page 24: System Diagram
System Diagram 1.5.1 RJ45 YSTEM DIAGRAM Figure 22 System Diagram 6xRJ45 (Wide Temp SKU) Figure 23 System Diagram 6xRJ45 (Normal Temp SKU) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 24...
Page 25: System Diagram 4Xrj45 + 2X10G/1G Sfp
RJ45 + 2 10G/1G SFP+ YSTEM DIAGRAM Figure 24 System Diagram 4xRJ45 + 2x10G/1G SFP+ (Wide Temp SKU) Figure 25 System Diagram 4xRJ45 + 2x10G/1G SFP+ (Normal Temp SKU) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 25...
Page 26: Component Installation
Component Installation 1.6.1 EMORY FWA-1112VC features 1x 260pin So-DIMM slot reserved for 1866/2133/2400Mhz ECC/Non- ECC DDR4 memory. Maximum capacity is 32G. Install Memory module as schematic diagram below: Wide Temp SKU Normal Temp SKU Figure 26 Memory Installation FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co.
Page 27: Storage
1.6.2 TORAGE FWA-1112VC features 1x M.2 M-key slot for M.2 2280 SATAIII SSD storage. Install Memory module as schematic diagram below: Wide Temp SKU Normal Temp SKU Figure 27 Storage Installation FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved.
Page 28: Wifi
1.6.3 FWA-1112VC features 1x M.2 E-key slot for M.2 3042 Wifi module. Install module as schematic diagram below : Wide Temp SKU Normal Temp SKU Figure 28 Wifi module Installation FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 28...
Page 29: Lte/5G
1.6.1 LTE/5G FWA-1112VC features 1x B.2 E-key slot for M.2 3042/3052 LTE/5G module. Install module as schematic diagram below: Wide Temp SKU Normal Temp SKU Figure 29 LTE/5G Installation FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 29...
Page 30: Operation Environment
Non-operating Temperature -20 ~ 80° C (-4 ~ 167° F)  Relative humidity 95% @ 40° C (non-condensing)  Storage temperature -40 ~ 85° C (-40 ~ 185° F) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 30...
Page 31: Mounting Instructions
Mounting Instructions 1.8.1 OUNT FWA-1112VC also comes with the wall mount kit. Install wall mount kit as schematic diagram below : Figure 30 Wall Mounting Kit(Wide Temp SKU) Figure 31 Wall Mounting Kit(Wide Temp SKU) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved.
Page 32: Rack Mount Kit
1.8.2 OUNT FWA-1112VC also comes with the rack mount kit. Install wall mount kit as schematic diagram below: Figure 32 Rack Mounting Kit(Wide Temp SKU) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 32...
Page 34: Operation
This method initiates a controlled shutdown of applications and the OS before the server enters standby mode. • Press and hold the Power button for more than 4 seconds to force FWA-1112VC to enter standby mode. This method forces FWA-1112VC to enter standby mode without properly exiting applications and the OS.
Page 35: Booting From Network Via Pxe
Below are the steps to enable PXE boot. 1. It needs to set BIOS/Post & Boot -> Network Stack as enabled (default setting is disabled) Figure 34 Enable PXE boot_1. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 35...
Page 36 2. When set Network Stack is enabled, and then go to item of “ BIOS/ Post & Boot -> CSM Parameters -> Network” to enable PXE ROM function, set it as “UEFI” (IPV4 PXE) function . Figure 35 Enable PXE boot.2 FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 36...
Page 37 Please note that it is recommended to setup a separate network / subnet for network booting as the DHCP required for PXE booting may conflict with existing DHCP servers in your network. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 37...
Page 38: Led Behaviour
Tri-stated Turn off 1.1.3 WWAN (LTE) LED I NDICATION Table 4 WWAN(LTE) LED Indication LED Behavior Module Status (Green) RF function ON Turn on RF function OFF Turn off FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 38...
Page 39: Wlan (Wifi) Led Indication
2. WLAN (WIFI)LED behavior in Win10(For Module W163 only, W162 is not supported in Win10) Description: LED remains on but off if AC on. LED remains on if no data transmitting. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 39...
Page 40: Software Definable Led Indication
LED Behavior Definition (Green/Red) TBD by Customer Turn off TBD by Customer Turn on (Red) TBD by Customer Turn on (Green) TBD by Customer Turn on (Red and Green) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 40...
Page 41: Main Board Connector Placement
Main Board Connector placement Figure 37 Board Placement Diagram (Top) Figure 38 Board Placement Diagram (Bottom) FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 41...
Page 42 SIM CARD Connector CN120 Mini PCIe Connector CN71,CN87 M.2 CONN (B KEY 3042) CN128 M.2 CONN (E KEY) CN70 M.2 CONN (M KEY 2280) WiFi and LTE LED Control Switch FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 42...
Page 43: Bios
BIOS FWA-1112VC BIOS is based on AMI’s APTIO BIOS and compliant to the UEFI, SMBIOS and ACPI specifications. The BIOS performs probing, initialization and configuration of the FWA-1112VC and initializes the OS boot process at the end of POST (Power-On-Self-Test).
Page 45 Auxiliary text providing information about the selected setup item is displayed in the top right corner. Figure 40 BIOS Setup Screen Organization FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 45...
Page 46: Main Setup Menu
Main Setup screen shown below. Users can always return to the Main setup screen by selecting the Main tab. Figure 41 BIOS Setup Main screen FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 46...
Page 47 BIOS Display only Shows the user privilege level according to the security settings. If password Access Level protection has not been enabled, this will default to “Administrator” FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 47...
Page 48: Setting System Time And Date
LATFORM ETUP Select the Platform tab from the FWA-1112VC setup screen to enter the Platform Setup screen. Users can select any of the items in the left frame of the screen, such as the Trusted Computing Configuration, to go to the sub menu for that item. Users can display a Platform BIOS Setup option by highlighting it using the <Arrow>...
Page 49: Serial Console
This sub menu allows you to change the settings used for the serial console. Note that the serial console is always using COM0 which is connected to the front panel. Figure 43 Platform Setup_Console Redirection Menu FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 49...
Page 50 When Enabled the data displayed on a terminal Disabled / Recorder Mode will be captured and sent as text messages to a Enabled remote server. Resolution Disabled / Enables or disables extended terminal resolution 100x31 FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 50...
Page 51 Redirection is enabled permanently. Emergency Management Disabled / Enabled serial console interface to the Disabled / Services (EMS) bootloader menu on modern versions of Microsoft Enabled Windows Console Redirection FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 51...
Page 52: Usb Configuration
This sub menu allows you to change the settings used for USB and to get an overview of the USB devices detected by the BIOS. Figure 44 Platform Setup_USB Configuration Menu FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 52...
Page 53 Controls the hand off of EHCI EHCI Hand-Off Enabled ownership from BIOS to OS at boot time. Disabled Port 60/64 Enabled Enables I/O port 60h/64h emulation Emulation support Disabled FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 53...
Page 54: Trusted Computing
Security Device. NOTE: Your None Pending Computer will reboot during restart in operation TPM Clear order to change State of Security Device. Enable Enable or Disable Platform Hierarchy Platform FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 54...
Page 55 1.1.5.1 H/W Monitor This sub menu allows you to see all the H/W monitor items detected by the BIOS for well know the current system health status. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 55...
Page 57: Virtualization
Intel Virtualization Enable Enable/Disable Intel Virtualization Technology , take effect after reboot Disable VT-d Enable/disable Intel Virtualization Technology Enable for Directed I/O (VT-d) by reporting the I/O Disable device FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 57...
Page 58: Platform Management
Figure 48 Platform Setup_Platform Management Table 13 Platform Management Menu Setup item Access / Options Description EIST Enable or disable BIOS support for Enhanced Enable Intel SpeedStep Technology, When enabled, OS FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 58...
Page 59 Package C State limit. The "waking-up time" No Pkg C-State, No limit will be longer if Package C state limit setting is S0Ix, No limit deep C state support. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 59...
Page 60: Hardware Setup Menu
Software after the "POST end" or "OS successfully loads". PowerON Watchdog Timer 2 minutes Configure length 4 minutes Watchdog Timer. Not available if Watchdog Timer is disabled. 6 minutes FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 60...
Page 62: Hardware Setup: Cpu Configuration
Access / Options Description CPU signature Microcode Patch Socket CPU Frequency 0 CPU Displays information on the processor Display only inform installed Processor Cores ation Intel VT-x Technology L1 code Cache FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 62...
Page 63: Hardware Setup: North Bridge Configuration
Disabled. 3.1.12 H ARDWARE ETUP ORTH RIDGE ONFIGURATION This menu allows the configuration of the memory controller and related features of the SoC. Figure 51 NorthBridge Configuration Menu FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 63...
Page 64 Select to enable / disable Patrol Scrub Support Enable Disable Enable Demand Select to enable / disable Demand Scrub None Scrub Enable Support Disable Enable Scrambler Enable / Disable the scrambler Disable FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 64...
Page 65: Hardware Setup: South Bridge Configuration
ACPI Settings Select sub-menu. S0 State Specify what state to go to when power state after G3 S5 State is re-applied after a power failure (G3 state). Last State FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 65...
Page 66: South Bridge Configuration: Sata Configuration
Table 17 Hardware Setup: SATA configuration Menu Items Feature Default Description Show current SATA devices in use on the FWA- SATA M.2 Display only 1112VC Enabled Enable SATA0 controll To enable the SATA controller Disabled FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 66...
Page 67: Acpi Setting
Enable lock of legacy resources Resources Disabled Enabled Lock Legacy Enable lock of legacy resources Resources Disabled 1.1.5.2 Hardware Setup: SW Button Configuration This menu contains settings for the Software Button. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 67...
Page 68: Setup Post & Boot Menu
Users can configure the system boot priority settings via the boot page. The default setting of boot priority of boot option #1 is “UEFI: Built-in EFI Shell”; Users can define the boot priorities based on the application. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 68...
Page 69 Enables or disables Quiet Boot option. Network Stack Disabled Enables or disables boot via Network (PXE) Boot Option Priority User Defined Sets the system boot order. CSM16 Parameters Select sub-menu. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 69...
Page 70: Compatibility Support Module (Csm) Configuration
Figure 57 Post & Boot Setup_CSM Configuration Menu Table 21 CSM Configuration Menu Setup item Access / Options Description CSM Support Enabled Enables or disables the Compatibility Support Module. Disabled FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 70...
Page 71 UEFI Only Network Storage Do not launch This item allows a more granular control UEFI of OptionROM execution depending of the Video type of extension device. Legacy Other PCI device FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 71...
Page 72: Csm16 Configuration
GA20; this option is useful Always when any RT code is executed above 1MB None Option ROM Force BIOS Set display mode for Option ROM Messages Keep Current FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 72...
Page 73: Security Setup
Setup. In Setup the User will have Administrator rights.  The password length must be in the following range: Minimum length: 3  Maximum length: 20  FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 73...
Page 74: Save & Exit Menu
3.1.20 S & E The FWA-1112VC BIOS allows users to store BIOS configuration results as “User Defaults.” Users can select “Save as User Defaults” to record all changes which had been made in previous pages as the default setting for further use.
Page 75 Restores the User defaults to all the setup options. Boot UEFI: < boot This option allows you to override the specified boot Override device> order and use a different boot device for the next boot. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 75...
Page 76 SMI is a trademark of Silicon Motion, Inc. Creative is a trademark of Creative Technology LTD. CHRONTEL is a trademark of Chrontel Inc. All other product names or trademarks are properties of their respective owners. FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 76...
Page 77 Platform Controllers Hub PCIe PCI Express PECI Platform Environment Control Interface PCI SIG PCI Special Interest Group PICMG PCI Industrial Computer Manufacturers Group POST Power On Self Test Power Supply Unit FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 77...
Page 78 Small Computer System Interface Sensor Data Record SerDes Serializer/Deserializer Serial Over LAN Solid State Disk Software Trusted Platform Module Transmit UDIMM Unbuffered DIMM UHCI Universal Host Controller Interface Universal Serial Bus FWA-1112VC_UserManual_Ed1 Copyright 2020 Advantech Co. Ltd. All rights reserved. Page 78...

Advantech FWA-1112VC User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech FWA-1112VC

Summary of Contents for Advantech FWA-1112VC

Table of Contents