Ai inference system based on nvidia jetson nano/jetson xavier nx (32 pages)
Summary of Contents for Advantech MIO-5377
Page 1
User Manual MIO-5377 ® 12th Gen Intel Core™ i7/i5/i3/ ® Celeron Series 3.5" SBC...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Page 3
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Page 4
Class I, Division 2, Groups A, B, C and D indoor hazards. Technical Support and Assistance Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Page 5
1 x Startup manual (p/n: 2046537700) 1 x Screw kit (3 x screws for M.2 device & 4 x screws and stand-off for Heatsink/ Cooler) 1 x DeviceOn Package Optional Accessories 1 x MIO-5377 Heat spreader (p/n: 1970005615T001) MIO-5377 User Manual...
Advantech embedded iManager 3.0, SUSI 4.0 and WISE-PaaS/DeviceOn. These SW solutions help monitor and control system operation effectively and remotely. MIO-5377 adopts the latest hybrid core design processor to engender improvements in CPU processing, graphics, security and I/O flexibility. Specifications...
Page 11
Storage: 60 °C @ 95%relative humidity, non-condensing Vibration 3.5 Grms Resistance Certification CE, FCC Class B Mechanical Dimensions 146 x 102 mm (5.7 x 4 in) * Support by request ** 5G module test with Fibocom FM350 (MediaTek) MIO-5377 User Manual...
This section introduces the installation of the heatsink found inside a white box inside the package. Please assemble it by following the diagram below. Remember to remove the plastic from thermal pad before assembly. Remove release paper Figure 2.7 MIO-5377 Cooler Installation Remove release paper Figure 2.8 MIO-5377 Heatsink Installation Remove release paper Figure 2.9 MIO-5377 Heatspreader Installation...
AMIBIOS has been integrated into motherboards for decades. With the AMIBIOS Setup program, you can modify BIOS settings and control the various sys- tem features. This chapter describes the basic navigation of the MIO-5377 BIOS setup screens. AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
4.1.2 Advanced BIOS Features Setup Select the Advanced tab from the MIO-5377 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
Page 40
Enable/Disable PCIE Native Control reported in ACPI Table. Native ASPM Choose ASPM feature is controlled by OS or BIOS. BDAT ACPI Table Support Determines if Enabled to support BDAT ACPI Table. Low Power S0 Idle Capability MIO-5377 User Manual...
Page 41
Number of P-cores to enable in each processor package. Active Efficient-cores Number of E-cores to enable in each processor package. Hyper-Threading This item allows users to Enable/Disable Hyper-Threading Technology. Enable/Disable AES (Advanced Encryption Standard). MachineCheck Enable/Disable Machine Check. MonitorMWait MIO-5377 User Manual...
Page 42
Configure Total Memory Encryption (TME) to protect DRAM data from physical attacks. 4.1.2.3 Power & Performance CPU – Power Management Control CPU – Power Management Control Options. GT – Power Management Control GT – Power Management Control Options. MIO-5377 User Manual...
Page 43
Enable/Disable Platform Power Limit 1 programming. Platform PL2 Enable Enable/Disable Platform Power Limit 1 programming. Power Limit 4 Override Enable/Disable Power Limit 4 override. C states Enable/Disable CPU Power Management. PowerLimit 3 Settings Power Limit 3 Settings. MIO-5377 User Manual...
Page 44
View/Configure Turbo Ratio Limit Options. Energy Efficient P-state Enable/Disable Energy Efficient P-state feature. Package Power Limit MSR Lock Enable/Disable locking of Package Power Limit settings. Energy Efficient Turbo Enable/Disable Energy Efficient Turbo feature. Config TDP Configurations MIO-5377 User Manual...
Page 45
Configurable TDP Lock Configurable TDP Mode Lock sets the Lock bit. CTDP BIOS control Enables CTDP control via runtime ACPI BIOS method. Power Limit 3 Settings Power Limit 3 Override Enable/Disable Power Limit 3 override. MIO-5377 User Manual...
Page 46
Check to enable render standby support. Maximum GT frequency Maximum GT frequency limited by user. Disable Turbo GT frequency Enabled/Disabled Turbo GT frequency. 4.1.2.4 PCH-FW Configuration ME State When Disabled ME will be put ME into Temporarily Disabled Mode. MIO-5377 User Manual...
Page 47
Unconfigure ME with resetting MEBx password to default on next boot. ASF Configuration Configure Alert Standard Format parameters. Secure Erase Configuration Secure Erase configuration menu. One Click Recovery(OCR) Configuration Configuration setting for One Click Recovery. Remote Platform Erase Configuration MIO-5377 User Manual...
Page 48
OS. ACPI Sleep State Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. PCIE Wake Enable or disable PCIE to wake the system from S5. MIO-5377 User Manual...
Page 49
Set Parameters of Serial Port 4. Hardware Monitor Monitor hardware Status. Watch Dog Timer Configuration Watch Dog Timer Configuration Page. Case Open Detection Enable or Disable Case Open Detect Function. GPIO Configuration MIO-5377 User Manual...
Page 50
Select ACPI Reporting Method for EC Devices. 4.1.2.6.1Serial Port 1 Configuration Serial Port Enable or Disable Serial Port (COM). Change Settings Select an optimal settings for Super IO device. COM Port Mode COM Port Mode Select. MIO-5377 User Manual...
Page 51
Enable or Disable Serial Port (COM). Change Settings Select an optimal settings for Super IO device. COM Port Mode COM Port Mode Select. 4.1.2.6.3Serial Port 3 Configuration Serial Port Enable or Disable Serial Port (COM). Change Settings MIO-5377 User Manual...
Page 52
Select an optimal settings for Super IO device. 4.1.2.6.4Serial Port 4 Configuration Serial Port Enable or Disable Serial Port (COM). Change Settings Select an optimal settings for Super IO device. 4.1.2.6.5Hardware Monitor MIO-5377 User Manual...
Page 53
4.1.2.6.6Watch Dog Timer Configuration Watch Dog Timer Enable or Disable Watch Dog Timer Function. 4.1.2.6.7GPIO Configuration GPIO Control Enable Choose to control GPIO by EC or user override during POST stage. GPIO0/1/2/3/4/5/6/7 Configure GPIO0/1/2/3/4/5/6/7. MIO-5377 User Manual...
Page 54
Select ACPI Reporting Method for EC I2C Bus. ACPI Report Method for CAN Bus Select ACPI Reporting Method for EC CAN Bus. ACPI Report Method for GPIO Select ACPI Reporting Method for EC GPIO. MIO-5377 User Manual...
Page 55
Physical Presence Spec Version Select to Tell O.S. to support PPI Spec Version 1.2 or 1.3. Device Select TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices. MIO-5377 User Manual...
Page 56
Serial Port Console Redirection Console Redirection This item allows users to configuration console redirection detail settings. Console Redirection EMS This item allows users to enable or disable console redirection for Microsoft Windows Emergency Management Services (EMS). MIO-5377 User Manual...
Page 57
DISABLE option will keep USB devices available only for EFI applications. XHCI Hand-off This is a workaround for OSes without XHCI hand-off support. The XHCI owner- ship change should be claimed by XHCI driver. MIO-5377 User Manual...
Page 58
Maximum time the device will take before it properly reports itself to the Host Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor. 4.1.2.12 Network Stack Configuration Network Stack Enable/Disable UEFI Network Stack. MIO-5377 User Manual...
Page 59
Controls the execution of UEFI and Legacy Storage OpROM. Video Controls the execution of UEFI and Legacy Video OpROM. Other PCI devices Determines OpROM execution policy for devices other than Network, Storage, or Video. MIO-5377 User Manual...
4.1.3 Chipset Configuration Select the Chipset tab from the MIO-5377 setup screen to enter the Chipset BIOS Setup screen. You can display a Chipset BIOS Setup option by highlighting it using the <Arrow> keys. All Plug and Play BIOS Setup options are described in this sec- tion.
Page 61
Control Iommu Pre-boot Behavior Enable IOMMU in Pre-boot environment. X2APIC Opt Out Enable/Disable X2APIC Opt Out Bit. DMA Control Guarantee Enable/Disable DMA_CONTROL_GUARANTEE bit. Above 4GB MMIO BIOS assigment Enable/Disable above 4GB Memory Mapped IO BIOS assignment. MIO-5377 User Manual...
Page 62
Gear ratio when SAGV is disabled. Memory Scrambler Enable/Disable Memory Scrambler support. Force ColdReset Force ColdReset OR Choose MrcColdBoot mode. In-Band ECC Support Enable/Disable In-Band ECC. Memory Remap Enable/Disable Memory Remap above 4GB. MIO-5377 User Manual...
Page 63
Graphics turbo IMON current values supported. GTT Size Select the GTT Size. Aperture Size Select the Aperture Size. PSMI Support Enable/Disable PSMI. DVMT Pre-Allocated Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. MIO-5377 User Manual...
Page 64
DMI Gen3 Eq Phase 3 Method Select Method for Gen3 Equalization Phase 3. DMI Gen3 ASPM DMI Gen3 ASPM Support. 4.1.3.1.4TCSS setup menu TCSS xHCI Support Enable/Disable TCSS xHCI. ITBT PECI1 Root Port MIO-5377 User Manual...
Page 65
Color depth and data packing format for Non-EDID Support. Dual LVDS Mode Select LVDS bus to Single bus mode or Dual bus mode. LVDS Panel Type This item allow user to select LVDS panel resolution type. MIO-5377 User Manual...
Page 66
Enable or disable boot option for LAN2 Controller. Restore AC Power Loss Specify what state to go to when power is re-applied after a power failure (G3 state). SPD Write Disable Enable/Disable setting SPD Write Disable. MIO-5377 User Manual...
Page 67
This item controls Active State Power Management of the DMI Link. PCI Express Root Port 5/12 PCI Express Port 5/12 Settings. 4.1.3.2.2SATA Configuration SATA Controller(s) Enable/Disable SATA Device. SATA Mode Selection Determine how SATA controller operate. SATA Controller Speed Limit MIO-5377 User Manual...
Page 68
Select ‘Enabled’ if Overcurrent functionality is used. USB3.1 Speed Selection USB3.1 Speed selection; GEN1 or GEN2. USB Port Disable Override Selectively Enable/Disable the corresponding USB Port from reporting a Device Connection to the Controller. MIO-5377 User Manual...
Page 69
If Enabled BIOS will force all GPIO pads to be in unlock state. 4.1.3.2.5HD Audio Configuration HD Audio Control Detection of the HD-Audio device. Disabled = HDA will be uncondition- ally disabled. Enabled = HDA will be unconditionally Enabled. MIO-5377 User Manual...
Enable additional timing parameters for all SerialIO controllers. 4.1.4 Security Select Security Setup from the MIO-5377 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this MIO-5377 User Manual...
Boot Option #1 Sets the system boot order. Fast Boot Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. MIO-5377 User Manual...
This item allows you to save the changes done so far as user defaults. Restore User Defaults This item allows you to restore the user defaults to all the options. Boot Override Boot device select can override your boot priority. MIO-5377 User Manual...
EC Watch Dog IRQ6 CANBus Controller IRQ7 Communications Port (COM3) IRQ8 System CMOS/real time clock IRQ9 Microsoft ACPI-Compliant System IRQ10 Communications Port (COM4) IRQ11 Display Controller IRQ12 Available IRQ13 Numeric data processor IRQ14 GPIO Controller IRQ15 Reserved MIO-5377 User Manual...