Icom ID-RP2010V Settings Manual page 16

3
DIGITAL REPEATER SETTING
Utility for ID-RP3 settings (Network settings)
D Using a Gateway server
Using the DHCP client function:
Automatically gets the repeater IP address and
Subnet mask from the connected router.
z Select "ON" in "DHCP."
Manually entering the repeater IP address and
Subnet mask:
1. Select "OFF" in "DHCP" (1).
2. Enter the fixed IP address and Subnet Mask
(2 3).
L If connecting the router that the DHCP Server
function is enabled, set the IP address that is outside
the range of the automatically assigned.
L If connect to other network through the repeater,
enter the same IP address as the target network.
D Time Settings
Turn ON or OFF the Network Time Protocol (NTP)
function.
If the NTP function is turned ON, the repeater gets the
exact time through a network.
L The setting required for giving a file-generating date
when saving a setting file (icf).
L Use default NTP server address if there are no problem.
1
2
3
14