Putting The Bodypack Transmitter Into Operation; Inserting And Changing The Battery; Connecting The Microphone - Sennheiser SK 5212-II - MANUAL 2 Instruction Manual

Putting the bodypack transmitter into operation

Putting the bodypack transmitter into
operation

Inserting and changing the battery

For powering the transmitter, use a 1.5 V AA size battery.

Connecting the microphone

The transmitter is designed for use with Sennheiser lavalier microphones and headmics. The
power supply of these microphones is via the microphone input
8
Open the battery compartment by pushing the two
catches in the direction of the arrows and open the
cover .
Insert the battery as shown in the diagram on the left.
Please observe correct polarity when inserting the
battery.
Close the battery compartment.
Connect the microphone to the microphone input
the transmitter.
Screw down the coupling ring.
of the transmitter.
of