Working With The Operating Menu - Sennheiser SK 5212-II - MANUAL 2 Instruction Manual

Working with the operating menu

The operating menu has three modes:
• Display mode:
In display mode, you can display the current menu settings one after the other – even when
the lock mode is activated.
• Selection mode:
In selection mode, you can select the menu whose setting you want to change. To change to
the selection mode, the lock mode must be deactivated.
• Setting mode:
In setting mode, you can change the setting of the selected menu.
By way of example of the "LOWCUT" menu, this section describes how to use the operating
menu.
Display Mode
SET/ON
MHz
MHz
Current low-cut
frequency
Selection Mode
SET
SET
TUNE
MHz
SET
LOWCUT
MHz
Adjusting
the low-cut
frequency
STORED
SET
Setting Mode
SET
120
Hz
Current low-cut
frequency
FLAT
Hz
FLAT,
120 Hz
Using operating menu
15