Overview Of The Displays - Sennheiser SK 5212-II - MANUAL 2 Instruction Manual

Overview of the displays

Display backlighting
When the lock mode is deactivated, the LC display remains backlit for approx. 20 seconds after
pressing a button.
1
CH dB
8 7 6
Alphanumeric display
Level display for audio signal "AF"
"RF" – appears when an RF signal is
transmitted
Lock mode icon (lock mode is
activated)
Operation and battery status indication
Red LED ...
... lights up normally
... is flashing
... lights up brightly
2
3
RF
AF
MHz
5 4
Meaning
The transmitter is switched on and the capacity of the battery is
sufficient (ON).
The battery is going flat
The transmitter is fully modulated (PEAK).
"MHz" – appears when the transmission
frequency is displayed
"dB" – appears when the microphone
sensitivity is displayed
"CH" – appears when the channel number is
displayed
Battery status display
(LOW BATT)!
Product overview
7