Putting The Bodypack Transmitter Into Operation; Inserting The Batteries/Accupack; Charging The Accupack; Connecting The Microphone Cable/Instrument Cable - Sennheiser SK 2000 Manual

Putting the bodypack transmitter into operation

Putting the bodypack transmitter into
operation

Inserting the batteries/accupack

For powering the bodypack transmitter, you can either use two 1.5 V AA
size batteries or the rechargeable Sennheiser BA 2015 accupack.
Open the battery compartment by pushing the two catches
direction of the arrows and open the cover µ.
¸
µ
Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
Close the battery compartment.
The battery compartment cover
click.

Charging the accupack

To charge the bodypack transmitter with the BA 2015 accupack (optional
accessory) installed:
Insert the bodypack transmitter into the L 2015 charger (optional
accessory).
The L 2015 charger can only charge the combination BA 2015
accupack/bodypack transmitter. Standard batteries (primary
cells) or individual rechargeable battery cells cannot be charged.

Connecting the microphone cable/instrument cable

The audio input is designed for the connection of both condenser micro-
phones and instruments (e.g. guitars). DC powering of the condenser
microphones is via the audio input
8
µ
²
µ
locks into place with an audible
MIC/LINE
²
³.
¸
in the