Putting The Bodypack Transmitter Into Operation; Inserting The Batteries/Accupack; Charging The Accupack; Connecting The Microphone Cable/Instrument Cable - Sennheiser SK 300 Instruction Manual

Putting the bodypack transmitter into operation

Putting the bodypack
transmitter into operation

Inserting the batteries/accupack

For powering the bodypack transmitter, you can either use
two 1.5 V AA size batteries or the rechargeable Sennheiser
BA 2015 accupack (optional accessory).
Open the battery compartment by pushing the two
¹
catches in the direction of the arrows and open the
cover ¸.
¹
¸
¸
Insert the two batteries or the accupack as shown
above. Please observe correct polarity when inserting
the batteries/accupack.
Close the battery compartment.
The battery compartment cover
an audible click.

Charging the accupack

To charge the BA 2015 accupack (optional accessory)
installed in the bodypack transmitter:
Insert the bodypack transmitter into the L 2015 charger
L 2015 (optional accessory).
The L 2015 charger can only charge the combination
BA 2015 accupack/bodypack transmitter. Standard
batteries (primary cells) or individual rechargeable
battery cells cannot be charged.
Connecting the microphone cable/
instrument cable
The audio input is designed for the connection of both
condenser microphones and other audio sources. DC
powering of the condenser microphones is via the
³
socket (3.5 mm jack socket).
Use one of the recommended Sennheiser microphones
or the CL 2 line cable (optional accessory).
Connect the 3.5 mm jack plug
microphone or line cable to the
(3.5 mm jack socket).
8
¸
locks into place with
MIC/LINE
from the Sennheiser
³
MIC/LINE socket
Putting the bodypack transmitter into operation
Lock the 3.5 mm jack plug by screwing down the
coupling ring .
Via the operating menu, adjust the sensitivity of the
microphone/line input (see "Adjusting the input sensi-
tivity – "Sensitivity"" on page 21).

Attaching and positioning the microphones

ME 2
Use the microphone clip
clothing (e.g. tie, lapel).
Attach the ME 2 microphone as close as possible to the
sound source.
The ME 2 clip-on microphone has an omni-directional pick-
up pattern. It is therefore not necessary to position it
precisely.
ME 3
Adjust the ME 3 headmic so that a comfortable and
secure fit is ensured.
The ME 3 headmic has a cardioid pick-up pattern.
Position the microphone so that its sound inlet is
directed towards the sound source (e.g. mouth).
³
to attach the microphone to
9