Putting the bodypack transmitter into operation
Putting the bodypack transmitter into
operation
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA
size batteries or the rechargeable Sennheiser BA 2015 accupack.
Open the battery compartment by pushing the two catches
direction of the arrows and open the cover µ.
¸
µ
µ
Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
Close the battery compartment.
The battery compartment cover
click.
Charging the accupack
To charge the BA 2015 accupack:
Insert the bodypack transmitter into the L 2015 charger (optional
accessory).
The L 2015 charger can only charge the combination BA 2015
accupack/bodypack transmitter. Standard batteries (primary
cells) or individual rechargeable battery cells cannot be charged.
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser micro-
phones and instruments (e.g. guitars). DC powering of the condenser
microphones is via the audio input (3.5 mm jack socket
Use one of the recommended Sennheiser microphones or the optional
CI 1 instrument cable (see pagec4).
Connect the 3.5 mm jack plug
instrument cable to the 3.5 mm jack socket
Lock the 3.5 mm jack plug by screwing down the coupling ring
the cable.
Via the operating menu, adjust the sensitivity of the microphone/line
input (see pagec17).
8
¸
in the
µ
locks into place with an audible
³).
MIC/LINE
from the Sennheiser microphone or
³.
MIC/LINE
³
of