Doing A Frequency Check; The Automatic Lock Mode (Autolock Function) - Sennheiser SK 5212-II - MANUAL 2 Instruction Manual

Doing a frequency check

The transmitter has a frequency check mode that prevents the transmitter transmitting on an
unwanted frequency after switch-on.
To change the transmission frequency, proceed as follows:
Release the ON/OFF
Within five seconds change to the "CHAN" or "TUNE" menu item.
Change the transmission frequency (see "Adjustment tips for the operating menu" on page 20).

The automatic lock mode (autolock function)

The transmitter has an autolock function (automatic lock mode) that can be activated or
deactivated via the "LOCK" menu (see page 24). When the autolock function is activated, the
lock mode is automatically activated 10 seconds after pressing the last button.
The autolock function can be deactivated permanently (see page 24) or temporarily (see
page 12).
When switching on the transmitter, keep the
button
The RF signal is deactivated. The current frequency is
displayed on the LC display panel
If the displayed frequency is the correct one,
Release the
After five seconds, "RF"
panel and the RF signal is activated.
RF
MHz
button .
Prior to this, the lock mode icon
RF
the LC display panel
being activated.
MHz
4
Using the bodypack transmitter
pressed.
ON/OFF button .
appears on the LC display
, indicating that the lock mode is
ON/OFF
.
flashes several times on
11